Adlink HSL-DO32-M-N/HSL-DO32-M-P Manual de usuario descargar pdf (Pagina 85)

72 HSL LinkMaster Utility

4.2.5 HSL-DI32 and HSL-DO32 Utility

1. Slave Address. Shows the slave index occupied by the

module. These modules occupy two slave indexes start-

ing from an odd number. For example, when you adjust

the DIP switch to 3, the modules are assigned indexes 3

and 5.

2. Digital Input. A white circle indicates no digital input; a

red icon indicates that the digital input is not activated.

3. Digital Output. Click on the icon to activate the digital

output. Red icon indicates that the digital output is turned

on, and vice-versa.

4. Slave Status: Shows the communication status between

the slave module and the master card. The functions

definition are enumerated below.

Z Bit 0 is Data_Req bit.

Z Bit 2 is for CHK1. When Bit2 is equal to 1, a communica-

tion error occurred once).

Z Bit 3 is for CHK3. When Bit3 is equal to 1, a communica-

tion error occurred three times.

Z Bit 4, Bit 5 and Bit 6 bits are for CHK7. WhenBit4, Bit5,

and Bit6 are all equal to 1, a communication error

occurred seven times.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 136 137

Sin comentarios

Adlink HSL-DO32-M-N/HSL-DO32-M-P Manual de usuario Pagina 85