Adlink HSL-DO32-M-N/HSL-DO32-M-P Manual de usuario descargar pdf (Pagina 52)

HSL Slave Module 39

3 HSL Slave Module

The HSL is a master-slave network system that features an inno-

vative distributed architecture that modularizes the communica-

tion, I/O functions and signal termination. ADLINK provides a

complete line of slave I/O modules and terminal bases including

discrete I/O, analog I/O, and motion control to meet your applica-

tion requirements. For motion control modules, refer to the HSL-

4XMO user’s manual.

Slave I/O Module. There are three groups of slave I/O modules

with varied dimensions. The slave I/O modules provide the termi-

nal base with different levels of I/O capability. To identify each

slave I/O module in an HSL network, an electronic data sheet is

embedded in the module, and each module is identified by an

address ID configurable via the 6-bit DIP switch. Depending on the

I/O support, each slave I/O module may be assigned one or two

address IDs. Since the highest ID number in an HSL master is 63

(6-bit and ‘0’ reserved for master), up to 63 slave I/O modules are

supported in one HSL master.

Terminal Base. Offers an easy wiring media. Both power and sig-

nal wiring go from the terminal base to the slave I/O modules.

Also, master links to all slave I/O modules via the terminal base

using an RJ-45 cable. The TB makes the slave I/O modules hot-

swappable without interfering other modules in the same HSL net-

work.

HUB/Repeater. Provides sub-system support for various network

topologies.

Wiring Cable. The cables connecting the HSL master and slave I/

O modules are standard 100 Base/TX with RJ-45 connectors.

These are exactly the same with commercial Ethernet cables.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 136 137

Sin comentarios

Adlink HSL-DO32-M-N/HSL-DO32-M-P Manual de usuario Pagina 52