Adlink HSL-4XMO Manual de usuario Pagina 35
- Pagina / 116
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Signal Connections 25
3.7 Alarm Signal ALM
The alarm signal ALM is used to indicate the alarm status from the
servo driver. The input alarm circuit is shown below. The ALM sig-
nal usually is generated by the servomotor driver and is ordinarily
an open collector output signal. An external circuit must provide at
least 6mA current sink capabilities to drive the ALM signal. For
more details of ALM signal operations, refer to section 4.7.
Figure 3-10: Alarm Signal ALM
3.8 Deviation Counter Clear Signal (ERC)
The deviation counter clear signal (ERC) is active in the following
4 situations:
1. Home return is complete
2. End-limit switch is active
3. An alarm signal stops OUT and DIR signals
4. An emergency stop command is issued by software
(operator)
The ERC signal is used to clear the deviation counter of the servo-
motor driver. The ERC output circuit is an open collector with a
maximum of 35V at 6mA driving capacity. For more details of ERC
operation, refer to section 4.7.
- HSL-4XMO 1
- Getting Service from ADLINK 3
- Table of Contents 5
- Table of Contents iii 7
- List of Tables 8
- List of Figures 9
- 1 Introduction 11
- 1.1 Features 12
- 1.2 Specifications 13
- Ω @ 0.5W 14
- °C – 60°C 14
- °C – 80°C 14
- 1.3 Supported Software 15
- 6Introduction 16
- 2 Installation 17
- ±5% External power supply 20
- Speed Selection 24
- Installation 15 25
- 16 Installation 26
- 3 Signal Connections 27
- 18 Signal Connections 28
- Signal Connections 19 29
- 20 Signal Connections 30
- Ω (None) 31
- 3.3 Origin Signal ORG 32
- Signal Connections 23 33
- 3.6 In-position Signal INP 34
- 3.7 Alarm Signal ALM 35
- 26 Signal Connections 36
- 3.12 Emergency Stop Input EMG 37
- 3.13 General-purpose Input 38
- 3.14 General-purpose Output 38
- Signal Connections 29 39
- 30 Signal Connections 40
- 4 Operation Theory 41
- 4.3 Command Delivering Time 42
- 34 Operation Theory 44
- Figure 4-3: DSP Multi-Tasks 44
- 4.6 Motion Control Modes 45
- 36 Operation Theory 46
- Velocity Mode Motion 47
- Trapezoidal Motion 48
- Operation Theory 39 49
- MaxVel = StrVel + accel*Tacc; 49
- 40 Operation Theory 50
- S-curve Profile Motion 51
- 42 Operation Theory 52
- X Relative Functions: 53
- ΔX: ΔY), respectively 55
- X t – Trapezoidal profile 56
- X s – S-Curve profile 56
- X r – Relative motion 56
- X a – Absolute motion 56
- ΔX: ΔY: ΔZ) 57
- ΔX */ , 2000.0/ 57
- 50 Operation Theory 60
- Home Return Mode 63
- 54 Operation Theory 64
- Figure 4-17: home_mode=0 64
- Operation Theory 55 65
- Figure 4-18: home_mode=1 65
- Figure 4-19: home_mode=3 65
- EZ -> Stop 66
- Operation Theory 57 67
- Figure 4-21: home_mode=5 67
- Figure 4-22: home_mode=6 67
- Figure 4-23: home_mode=7 67
- > Slow down -> Stop 68
- Operation Theory 59 69
- Figure 4-26: home_mode=10 69
- 60 Operation Theory 70
- Figure 4-27: home_mode=11 70
- Figure 4-28: home_mode=12 70
- Operation Theory 61 71
- 62 Operation Theory 72
- HSL_M_set_home_config() 72
- HSL_M_home_move() 72
- HSL_M_home_search() 72
- Operation Theory 63 73
- SVON and RDY 75
- ±EL: End-limit sensor 76
- 4.9 The Counters 78
- Feedback Position Counter 79
- Position Error Counter 81
- General Purpose Counter 81
- Target Position Recorder 82
- Operation Theory 73 83
- HSL_M_reset_target_pos() 83
- Change Speed on the Fly 84
- Operation Theory 75 85
- 76 Operation Theory 86
- Relative Functions: 89
- Change Position on the Fly 90
- Operation Theory 81 91
- 4.12 Position Compare 92
- Position Compare 93
- 86 Operation Theory 96
- HSL_M_set_trigger_type () 96
- HSL_M_backlash_comp() 96
- HSL_M_suppress_vibration() 96
- 4.14 Software Limit Function 97
- 4.15 Point Table Management 97
- 4.16 Motion Script Download 98
- Main Menu 101
- SD, and LTC 102
- Pulse IO Configuration Menu 103
- Operation Menu 105
- 6 Appendix 113
- 104 Appendix 114
- 0.5 + (Num – 4)/2 * 0.24 ms 114
- Warranty Policy 115
- 106 Warranty Policy 116
Relacionado con productos y manuales para Hardware Adlink HSL-4XMO
Hardware Adlink HSL-DI16DO16-M-NN Manual de usuario
(137 paginas)
(137 paginas)
Hardware Adlink HSL-AI16AO2-M-VV/-AV Manual de usuario
(137 paginas)
(137 paginas)
Hardware Adlink PCI-8124-C Manual de usuario
(102 paginas)
(102 paginas)
Hardware Adlink ND-6067 Manual de usuario
(285 paginas)
(285 paginas)
Hardware Adlink ND-6510 Manual de usuario
(95 paginas)
(95 paginas)
Hardware Adlink ND-6520 Manual de usuario
(95 paginas)
(95 paginas)
Hardware Adlink ND-6530 Manual de usuario
(95 paginas)
(95 paginas)
Hardware Adlink ND-6013 Manual de usuario
(108 paginas)
(108 paginas)
Hardware Adlink ND-6017 Manual de usuario
(108 paginas)
(108 paginas)
Hardware Adlink ND-6018 Manual de usuario
(108 paginas)
(108 paginas)
Hardware Adlink ND-6021 Manual de usuario
(65 paginas)
(65 paginas)
Hardware Adlink ND-6024 Manual de usuario
(65 paginas)
(65 paginas)
Hardware Adlink ND-6050 Manual de usuario
(107 paginas)
(107 paginas)
Hardware Adlink ND-6052 Manual de usuario
(107 paginas)
(107 paginas)
Hardware Adlink ND-6053 Manual de usuario
(107 paginas)
(107 paginas)
Hardware Adlink ND-6054 Manual de usuario
(107 paginas)
(107 paginas)
Hardware Adlink ND-6056 Manual de usuario
(107 paginas)
(107 paginas)
Hardware Adlink ND-6058 Manual de usuario
(107 paginas)
(107 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales