Adlink Express-BASE Manual de usuario descargar pdf (Pagina 25)

Page 25Express-BASE User’s Manual

JP7: Backlight Power Voltage

Selects the Backlight Power voltage on CNY8

Backlight Control pin header (pin 8).

Jumper Status

1-2 + 12V

2-3 + 5V <<<<

JP8: Panel Power Voltage

Selects the Panel Power voltage on CNY8

Backlight Control pin header (pin 2).

Jumper Status

1-2 + 3.3V <<<<

2-3 + 5V

6.12 LVDS Jumper Settings

JPZ1: Brightness Control

Sets the Panel Brightness Control (CNY8 pin 3:

Backlight CTRL) to Voltage Level or PWM .

When set to Voltage Level, the Backlight CTRL

signal can be varied from 0~5V in 0.5V

increments.

Jumper Status

1-2 Voltage Level

2-3 PWM <<<<

Jumper Status

1-2 GPU

2-3 LVDS I2C <<<<

JPZ2: Brightness PWM Source

Sets the Panel Brightness PWM Source

to GPU or LVDS I2C. When Brightness PWM

Source is set to LVDS I2C, the user will be able

to use the AIDI Library AidiVgaSetBacklight

command to control the PWM pulse to the panel

backlight.

JPY9: Backlight Enable Signal Type

Sets the Backlight Enable Signal to "Normal"

or "Inverse" type.

Jumper Status

1-2 Inverse

2-3 Normal <<<<

NOTE: <<<< indicates default setting

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

Sin comentarios

Adlink Express-BASE Manual de usuario Pagina 25