Adlink Starter Kit - nanoX Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
If you are not using a DVI monitor with the ADD2 DVI card, skip ahead to Section 2.4, DVI
Display Interface Installation.
Install SDVO flat cable onto carrier board (if necessary)
Required items
Step 8
Lift the locking mechanism on the nanoX-BASE SDVO
input connector (CN30) and insert the SDVO flat cable.
Insert the SDVO flat cable into nanoX-BASE SDVO input
connector and press down on the locking mechanism
Page 20 NanoX Starter Kit – Quick Start Guide
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Comentarios a estos manuales

Sin comentarios