Adlink nanoX-TCR Manual de usuario descargar pdf (Pagina 9)

Chapter 2 Product Overview

nanoX-TCR Reference Manual 5

Product Description

The nanoX-TCR is an exceptionally high integration, high performance, rugged Intel® Atom™ E6XXT

processor based system, compatible with the COM Express standard. This rugged and high quality module

system contains all the component subsystems of an ATX motherboard plus the equivalent of several PCI

Express expansion boards.

The Intel Atom E6XXT series CPUs integrate processor cores with Graphics and Memory Controller Hubs

(GMCHs), providing low-power, high-performance processors, memory controllers for up to 2GB of on-

board memory, and graphics controllers for LVDS and SDVO signals.

The Intel EG20T PCH (Platform Controller Hub) provides controllers for a range of common interfaces

including six USB 2.0 ports and up to two SATA ports as well as embedded interfaces for CAN (optional),

GPIO, and I2C. The nanoX-TCR provides an optional Solid State Drive through the SATA1 port and one

Gigabit Ethernet interface through the Intel 82574IT Gigabit Ethernet controller chip (external magnetics

required) using PCIe Port1 from the CPU. The PCIe Port0 connects the PCH to the CPU.

Expansion for additional system functions is possible on the nanoX-TCR through the PCIe and LPC

expansion buses. The PCIe and LPC buses operate at clock speeds of 100MHz and 33MHz, respectively.

The nanoX-TCR is particularly well suited for either embedded or portable applications and meets the size,

power consumption, temperature range, quality, and reliability demands of embedded system applications.

Module Features

• CPU

♦

Provides Intel® Atom™ 600MHz (E620T), 1.3GHz (E660T), or 1.6GHz (E680T) Processor Cores

and Graphics Memory Hubs

♦

Provides internal 512-kB, 8-way L2 cache

♦

Provides Enhanced Intel SpeedStep® Technology (EIST)

♦

Supports Hyper-Threading Technology

♦

Provides L2 Dynamic Cache Sizing

♦

Supports 32-bit physical addresses and 48-bit linear addresses

♦

Provides 3D graphics engine

♦

Provides single-channel DDR2 memory controller

• Memory

♦

Provides non-ECC, unbuffered memory

♦

Provides up to 2 GB of +1.8V DDR2 soldered, on-board memory

♦

Supports 32-bit data bus

♦

Supports DDR2 800MHz memory

• Expansion Buses

♦

PCIe between CPU/PCH and COM Express connector

♦

LPC (Low Pin Count) for LPC devices

♦

C for fast mode I

C devices

♦

SMBus for expansion cards

♦

CAN bus for devices on the baseboard

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 49 50

Comentarios a estos manuales

Sin comentarios

Adlink nanoX-TCR Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Adlink nanoX-TCR