Adlink aTCA-9710 Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
22
3.3 I/O Interfaces
3.3.1 USB
The aTCA-9710 supports Five USB 2.0 ports:
3x Type-A ports on front panel
Two ports routed to RTM (available on the aTCA-R6280 RTM)
On the USB 2.0 front panel port, a USB cable up to 5 meters in length can be used.
On the USB 2.0 Rear I/O ports, it is strongly recommended to use a cable less than 3 meters
in length for USB 2.0 devices.
The USB 2.0 ports are high-speed, full-speed, and low-speed capable. Hi-speed USB 2.0
allows data transfers of up to 480 Mb/s, 40 times faster than a full-speed USB (USB 1.1).
One USB peripheral may be connected to each port.
With the aTCA-R6280 RTM, the aTCA-9710 supports two additional USB ports on the I/O
panel of the RTM.
USB Connector Pin Definition (Type A)
Pin Signal
1 5V USB VCC
2 USB-
3 USB+
4 GND USB
Note: The aTCA-9710 host interfaces can be used with a maximum 500mA continuous load
current as specified in the Universal Serial Bus Specification, Revision 2.0. Short circuit
protection is provided. All the signal lines are EMI filtered.
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 89 90

Comentarios a estos manuales

Sin comentarios