Adlink aTCA-9710 Manual de usuario Pagina 12
- Pagina / 90
- Tabla de contenidos
- MARCADORES
- User’s Manual 1
- Revision History 2
- Table of Contents 3
- 1 Overview 5
- 1.2 Block Diagram 6
- 1.3 Package Contents 7
- 2 Specifications 8
- 2.1.3 Software 9
- 2.2 Power Consumption 10
- 2.3 Board Layout 11
- 2.3.3 aTCA-9710 Front Panel 13
- 2.3.4.5 Hot-swap LED 15
- 2.4 Compliance 17
- 3 Functional Description 18
- 3.1.2 Memory 19
- 3.2 Peripherals 20
- 3.2.2 SMBus Devices 21
- 3.3 I/O Interfaces 22
- 3.3.2 VGA Interface 23
- 3.3.3 Ethernet Connection 23
- 3.3.4 Serial Port 24
- 3.3.5 Onboard mSATA Module 24
- 3.3.6.2 IPMC JTAG Signal 25
- 4.1 IPMI Sensors 26
- 4.1.3 Watchdog Timer Sensor 30
- 4.1.4 Version Change Sensor 31
- 4.2 IPMI Commands 35
- 5 Getting Started 37
- Installing the Blade 38
- 5.2.2 Removing the Blade 42
- 5.3.2 Update over KCS 46
- 5.3.3 Update over LAN 47
- 6.1.1 Navigation 48
- 6.2 Main BIOS Setup Screen 50
- 17:30:00 51
- 6.3 Advanced Setup Screen 52
- Fabric 40G LAN3/4 PXE ROM 53
- RTM 10G LAN1/2 PXE ROM 53
- RTM 10G LAN3/4 PXE ROM 53
- RTM 10G LAN5/6 PXE ROM 53
- Coleto Creek Control 53
- 6.3.1 ACPI Settings 54
- Serial Port 1 Configuration 55
- Serial Port 2 Configuration 55
- Serial PortGSIO200 56
- Console Redirection 57
- Terminal Type 58
- Bits per second 58
- Data Bits 58
- Stop Bits 58
- SR-IOV Support 60
- Network Stack 61
- IPv4 PXE Support 61
- IPv6 PXE Support 61
- PXE boot wait time 61
- 6.3.6 CSM Configuration 62
- 6.3.7 Trusted Computing 63
- 6.3.8 ADLINK IPMI settings 64
- OS Load Watchdog Timeout 65
- 6.4 Intel RC Setup 66
- Hyper-Threading [ALL] 67
- Enable Intel TXT Support 67
- Cores Enabled 68
- Power Technology 69
- Config TDP 69
- EIST (P-states) 70
- Turbo Mode 70
- ACPI T-States 71
- 6.4.4 Memory Configuration 72
- Memory Map 73
- 6.4.5 IIO Configuration 74
- PCIe x8 to aDB-9710 75
- PCIe x16 to aDB-9710 75
- Socket 0 PcieD0xFx - Port xx 75
- 6.4.6 PCH Configuration 76
- Configure SATA as 77
- 6.5 Server Mgmt Setup Screen 78
- 6.6 Boot Setup Screen 79
- 6.7 Security Setup Screen 80
- Save Changes and Exit 81
- Discard Changes and Exit 81
- 7 Serial Over LAN 83
- 7.3.1 BIOS Configuration 84
- 7.3.2 Linux grub Setting 84
- 7.4 Establish SOL Connection 85
- 8 Drivers 87
- Safety Instructions 88
- Getting Service 89
Relacionado con productos y manuales para Hardware Adlink aTCA-9710
(86 paginas)
(58 paginas)
(59 paginas)
(82 paginas)
(76 paginas)
(27 paginas)
(42 paginas)
(80 paginas)
(91 paginas)
(91 paginas)
(112 paginas)
(148 paginas)
(158 paginas)
(102 paginas)
(114 paginas)
(110 paginas)
(92 paginas)
(78 paginas)
(54 paginas)
(60 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.132 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales