
Power Supply Unit • 33
4
Power Supply Units
The cPCIS-1100 Series subsystems are equipped with either the Zippy
Technology Corp. PS2 HG2-6400P industrial grade ATX power supply,
ADLINK’s cPS-H325/AC CompactPCI power module or ADLINK’s
cPS-P325/AC wide range temperature operating CompactPCI power module
(see Section 1.3 Configurations).
4.1 ATX: Zippy PS2 HG2-6400P
Features
• Active PFC (full range)
• 12V Max. Current : 30A
• Noise & Thermal Control
Specifications
• Operating Temperature Range: -10°C ~ +45°C
• Cooling: one 80mm DC fan
• Active Power Factor Correction meets IEC-1000-3-2 CLASS D
• Dimensions: 140.00x150.00x86.00 (mm)
• Hold Up Time: 16 ms minimum at full load & normal input voltage
• Dielectric Withstand: input / output 1500 VAC for 1 second
input to frame ground 1500 VAC for 1 second
• Efficiency: 70% typical at 115V, full load.
• Power Good Signal: on delay 100 ms to 500 ms, off delay 1 ms
• Over Load Protection: 130 +/- 20%
• Over Voltage Protection:
5V → 5.7V – 6.5V; 3.3V → 3.9 – 4.3V; 12V → 13.6 – 15V
• Short Circuit Protection: +5V, -5V, +12V, -12V, +3.3V
• EMI Noise Filter: FCC CLASS B, CISPR22 CLASS B
• Safety: UL 60950, CSA 22.2 NO/ 60950, TUV EN-60950& CCC.
• MTBF: 135,268 hrs
Comentarios a estos manuales