Adlink AmITX-IB-I Manual de usuario descargar pdf (Pagina 36)

24 Getting Started

3.3 System Memory

The AmITX-IB-I supports up to 16 GB of DDR3-1066/1333

SDRAM in two 204-pin SO-DIMM sockets. See Figure 2-1 on

page 7 for SO-DIMM socket locations.

Memory Module Installation

The DDR3 memory modules are notched to facilitate correct

installation in the DIMM sockets.

To install a memory module:

1. Unlock the SO-DIMM socket by pressing the retaining

clips outward.

2. Align the memory module on the socket, making sure that the

notch matches the break on the socket.

WARNING:

Disconnect all power supply to the board before installing a

memory module to prevent damaging the board and mem-

ory module .

DDR3 SO-DIMM Notch

Unlocked retaining clip

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 81 82

AmITX-IB-I 1
Revision History 2
Preface iii 3
Conventions 5
Table of Contents 7
List of Figures 9
List of Tables 11
1 Introduction 13
1.2 Overview 14
1.3 Features 14
1.4 Specifications 15
1.5 Block Diagram 17
1.6 Mechanical Dimensions 18
2 Connectors & Jumpers 19
2.2 Rear I/O Connectors 21
DVI-D Connector (CN1-L) 22
HDMI Connector 22
USB 2.0 Connectors 23
USB 3.0 Connectors 23
PS/2 Keyboard/Mouse 23
LAN Port (RJ-45) 24
Audio I/O port 24
2.3 Onboard Connectors 25
System Panel Header (F_PANEL) 26
GPIO Connector (JDIO) 27
SATA Connectors (SATA1~2) 27
SPI Header (SPI1) 28
2.4 Jumpers 29
18 Connectors & Jumpers 30
3 Getting Started 31
20 Getting Started 32
Do NOT touch socket contacts 32
WARNING: 33
22 Getting Started 34
CAUTION: 35
3.3 System Memory 36
Unlocked retaining clip 37
3.4 Driver Installation 38
Getting Started 27 39
AD-mITX-T40H 39
28 Getting Started 40
4 BIOS Setup 41
4.1.2 Navigation 42
4.2 Main Setup 43
4.3 Advanced Setup 44
4.3.1 ACPI Configuration 45
ACPI sleep State 45
S3 Video Repost 45
RTC Alarm Power On 45
Wake on PCIE 46
4.3.2 CPU Configuration 46
4.3.3 SATA Configuration 47
SATA Controller(s) 47
SATA Mode 47
4.3.4 PCH-FW Configuration 48
4.3.5 USB Configuration 49
Legacy USB Support 49
Serial Port 3~6 Configuration 50
4.3.7 Super IO Configuration 51
Serial Port 1~2 Configuration 51
Watch Dog Timer 51
RS232/422/485 Selection 51
4.3.8 H/W Monitor 52
Smart Fan Mode Configuration 52
4.3.9 Option ROM Policy 53
Boot Option Filter 53
Launch PXE OpROM policy 53
Launch Storage OpROM policy 53
4.3.10 CPU PPM Configuration 54
Turbo Mode 54
4.4 Chipset Setup 55
4.4.1 PCH-IO Configuration 56
USB Configuration 57
PCH Azalia Configuration 58
BIOS Setup 47 59
Graphics Configuration 60
Primary Display 60
Internal Graphics 60
DVMT Pre-Allocated 60
DVMT Total Gfx Mem 60
LCD Control 61
NB PCIe Configuration 62
Memory Configuration 63
4.5 Boot Setup 64
4.6 Security Setup 65
4.7 Save & Exit Menu 66
Appendix A 67
Super IO Programming Guide 67
Read back GPIO Input Status 69
A.3 Watchdog Sample Code 70
Appendix B - System Resources 73
B.3 I/O Map 74
66 System Resources 78
Important Safety Instructions 79
Getting Service 81
70 Getting Service 82

Comentarios a estos manuales

Sin comentarios

Adlink AmITX-IB-I Manual de usuario Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Adlink AmITX-IB-I